Came UNIPARK M parking barrier, automatic, additional

The additional UNIPARK M is a parking barrier with a 24 V DC motor but no control board of its own. Use it to add another parking space to an automatic UNIPARK barrier, controlled by the same ZL22N board and receiver.

In the box

• Base plate with motor – UNIPARK 001UNIP with irreversible 24 V DC gearmotor and hex release key.
• Hoop – Small ARK 1 hoop, 350 × 450 mm, for parking spaces up to 2 m wide.
• Expansion module – LM22N, fitted in the ZL22N enclosure of the main barrier and connected by cable.

How it works

• Main barrier – you need an automatic UNIPARK M or automatic UNIPARK ML with the ZL22N board. Up to 3 additional barriers connect to one board.
• Control – the LM22N module stores its own 50 transmitters and the same code cannot be stored in all barriers. Operate this barrier with another transmitter button, for example on the 4-channel TOP44FGN. Several barriers at once are raised with a wired command.
• Power cut – release the barrier with the hex key.

Good to know before installation

• Safety – the barrier has no photocells. Operate it only when you can see it directly.
• Foundation – the manufacturer recommends a 400 × 600 mm concrete base, 100 mm deep, with a cable conduit.

We install in the Košice and Prešov regions; send enquiries to saver@saver.sk. We are happy to advise at eshop@saver.sk.